SMP
DISTRIBUTORS DISTRIBUTORS SALES FORCE
SEARCH OUR SITE:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PRODUCTS
Factory Air Products
Superior Products
Compressors
Accumulators and Driers
Motors
Hose Assemblies
Water Outlets
Tensioners
Expansion Devices
Problem Solving Parts
Product Downloads
Accumulators and Driers
Superior Quality, Superior Craftsmanship
The aluminum accumulator is assembled using a universal can top which is punched with the appropriate hole configuration at the point of use. The port and outlet fittings are welded to the can top. The anti-siphon tube is assembled through the can into the inlet fitting, then welded in place. The anti-siphon tube is manufactured in house by cutting the tube to length, assembling the filter, end forming with the OEM trumpet design, bending, and punching the pickup and pressure equalization holes. The bottom can is assembled to the top can with the desiccant bag inside. The two halves are then welded around the outside of the seam.

After welding is complete the valve cores are assembled in the port fittings and the unit is checked for leaks. The units are leak tested using a nitrogen pressure test underwater. Once the accumulators pass leak test, caps are assembled and each unit individually packed in a cardboard box with o-ring kits.

Home Site Map Legal Privacy Seperator SMP Global  Contact Us SMP
Site Designed and Development by Multimedia Solutions Copyright© 2013 Standard Motor Products, Inc.. All rights reserved.